Shaoxing Weimin Fire Fighting Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of 6kg abs fire cabinets in China. If you're going to wholesale bulk CE and ISO approved 6kg abs fire cabinets, welcome to get pricelist and free sample from our factory. All customized products are with high quality and low price.
6KG ABS Fire Cabinets Manufacturer
A 6KG ABS Fire Cabinet is a wall-mounted enclosure designed to store a single 6kg portable fire extinguisher in a fixed installation position. The cabinet body is formed by ABS injection molding, creating a rigid shell that defines a closed storage volume for cylindrical extinguishers typically used in electrical rooms, warehouse fire points, and mechanical equipment zones.
The cabinet does not participate in fire suppression. Its function is to retain the extinguisher in a fixed location, protect the cylinder surface, and maintain visibility and accessibility under routine inspection conditions.
How the Cabinet Works in a Fire Safety Layout
The cabinet operates as a passive mechanical housing system. During installation, the extinguisher is placed into an internal retention bracket that prevents axial movement during vibration or accidental impact.
In normal operation:
ABS shell resists external contact from tools, carts, or maintenance activity
Transparent inspection window allows visual verification of pressure gauge and safety pin
Front door remains closed using a latch or snap-lock mechanism
During emergency use:
Operator opens front door using manual force on latch point
Retention strap releases cylinder from fixed position
6kg extinguisher is removed and deployed according to fire response procedure
The system does not require electrical triggering or mechanical linkage to fire detection systems.
Structural Components and Material Behavior
ABS Housing Body
The cabinet shell is manufactured using ABS thermoplastic through injection molding. The structure forms a single rigid enclosure that resists deformation under wall-mounted load conditions.
Material behavior characteristics include:
Impact resistance under mechanical contact during warehouse operations
Dimensional stability during long-term vertical wall mounting
Surface resistance to moisture exposure in indoor or semi-enclosed environments
Transparent Inspection Window
A PC (polycarbonate) or acrylic panel is integrated into the front door section. This component allows direct visual inspection of:
Cylinder pressure gauge position
Safety pin status
Presence of extinguisher inside cabinet
This reduces the need to open the cabinet during routine fire equipment checks.
Internal Retention System
Inside the cabinet, a fixed bracket or elastic strap system is used to:
Clamp cylinder body diameter (designed for 6kg standard extinguisher size)
Prevent lateral movement during vibration or transport shock
Maintain vertical alignment of the extinguisher inside the housing
Wall Mount Interface
Rear-side mounting holes are pre-formed during molding. During installation, expansion bolts or screws transfer cabinet load directly into concrete or steel wall structures.
Model: 6kg ABS cabinet
Professional Fire Protection Enclosure
Material
ABS (Cabinet body)
Perspex (middle mirror)
Dimensions
Thickness: 3.0mm
Dimension: 700*300*253mm
(Using for 4kg&6kg fire extinguishers)
Deployment
Installation: Wall mounted/Recessed
Capacity: 1 NO. Dry chemical powder fire extinguisher
Colorway
Color: Red& black (one side with red color, one side with black color).
HANDLING AND STORAGE
Storage temperature
-30°C - 60°C
Environment
dry and free from vibrations.
Chemical Restriction
Keep away from natriumhypochlorite (bleach).
Installation Process in Industrial Fire Point Systems
The cabinet is designed for standardized fire point installation along fixed evacuation routes or equipment zones.
Typical installation sequence:
Mark wall mounting position at designated fire point height (commonly 1.2–1.5 m from floor level)
Drill anchor holes aligned with rear cabinet mounting points
Fix ABS cabinet using expansion bolts or screws
Insert 6kg extinguisher into internal bracket system
Close front door and verify latch engagement
The system is installed as a static fire point module, meaning position does not change after commissioning unless fire layout is modified.
Operating Environment and Engineering Limits
The cabinet is designed for indoor or semi-enclosed environments where temperature and humidity are controlled by building structure rather than direct outdoor exposure.
Typical operating conditions:
Ambient temperature: approximately -20°C to +60°C (ABS material dependent)
Installation environment: electrical rooms, warehouses, parking structures, equipment corridors
Exposure type: indirect humidity, dust accumulation, mechanical contact risk
Failure mode is primarily mechanical rather than chemical:
Door latch wear after repeated manual opening
Surface deformation under sustained impact load
UV exposure degradation if installed in direct sunlight over long periods
Compatibility with 6KG Fire Extinguisher Systems
The internal cavity is dimensioned for standard 6kg portable extinguishers, including:
Cylinder outer diameter within typical industrial 6kg range
Standard valve head geometry clearance
Pressure gauge visibility alignment through inspection window
If extinguisher diameter exceeds design tolerance, bracket interference may occur, affecting insertion or removal force.
Maintenance and Replacement Procedure
The cabinet does not require active maintenance systems. Inspection is based on mechanical condition checks:
Verify door latch engagement force
Inspect ABS surface for cracks or impact marks
Confirm visibility through inspection window is not obstructed
Check internal bracket elasticity or strap tension
Replacement process:
Open cabinet door
Remove extinguisher cylinder
Detach mounting screws if cabinet replacement is required
Install new cabinet and repeat wall fixation process
No calibration or pressure-related maintenance is required for the cabinet structure itself.
Procurement and Manufacturing Control (Weimin)
For batch procurement projects, Weimin controls cabinet production through:
ABS injection mold consistency control for dimensional repeatability
Pre-defined mounting hole positioning for installation alignment across batches
Compatibility verification with 6kg extinguisher cylinder diameter standards
OEM options including logo embossing on ABS shell surface
Carton packing configuration optimized for bulk shipment stacking stability
Each production batch is inspected for:
Door closure alignment
Window sealing position
Mounting hole spacing tolerance
Request for Engineering Support
For procurement projects, provide: 6kg extinguisher outer diameter specification, installation wall type (concrete / steel / composite panel), required cabinet color or OEM marking, project quantity and delivery schedule.
Weimin can supply compatibility confirmation drawings, installation dimension data, and batch quotation based on fire point layout requirements.
Hot Tags: 6kg abs fire cabinets, China 6kg abs fire cabinets manufacturers, suppliers, factory, 12KG Fire Cabinet, 6KG ABS Fire Cabinets, abs fire cabinets, ABS Fire Extinguisher Cabinet, Waterproof Plastic Fire Cabinet Enclosure
